587-335-9746

Eye-level medium shot of technician using industrial stripping solution to scrub scale from cast iron bathtub floor, bright bathroom overhead lighting
Eye-level medium shot of technician using industrial stripping solution to scrub scale from cast iron bathtub floor, bright bathroom overhead lighting
Close-up shot of acid etching solution forming microscopic foam across porcelain bathtub floor under focused warm LED work light
Close-up shot of acid etching solution forming microscopic foam across porcelain bathtub floor under focused warm LED work light
• Refinishing Step 01

Surface Preparation

Thorough cleaning and chemical etching eliminate embedded oils, limescale, and soap residue to expose the raw substrate for bonding.

Chemical Stripping

Industrial strength cleaners dissolve mineral crust, soap scum, and residual wax, stripping the original enamel back to a pristine, bare surface.

Micro-Porous Acid Etching

A specialized acid etching agent opens microscopic pores across porcelain or acrylic walls, providing the mechanical grip necessary for coating adhesion.

Detail shot of hand applying epoxy filler compound into porcelain bathtub chip, surrounded by fine orbital sanding dust and tools
Detail shot of hand applying epoxy filler compound into porcelain bathtub chip, surrounded by fine orbital sanding dust and tools
Wide angle of bathtub fully draped in brown protective paper with crisp blue tape line along tile grout edge and sealed chrome fixtures
Wide angle of bathtub fully draped in brown protective paper with crisp blue tape line along tile grout edge and sealed chrome fixtures
• Refinishing Step 02

Repair and Priming

Structural damaged areas are filled, feather-sanded, and isolated with high-grade protective masking tape prior to primer bonding.

Structural Chip Repair

Waterproof epoxy resins level deep chips, gouges, and rust spots flush with surrounding enamel, eliminating structural weaknesses in the shell.

Precision Protective Masking

Surrounding ceramic wall tiles, chrome faucets, and drains are sealed under heavy protective paper and painter tape to protect bathroom surfaces from overspray.

Technician in full protective respirator applying white HVLP spray coating in even passes inside masked bathtub unit
Technician in full protective respirator applying white HVLP spray coating in even passes inside masked bathtub unit
Pristine high-gloss restored white bathtub in modern residential bathroom reflecting clean soft ambient illumination
Pristine high-gloss restored white bathtub in modern residential bathroom reflecting clean soft ambient illumination
• Refinishing Step 03

Refinishing and Final Result

Multiple passes of high-density polymer acrylic produce a durable, high-gloss white surface ready for long-term residential use.

HVLP Polymer Application

High-volume low-pressure equipment applies uniform layers of industrial coating, bonding deeply with the etched surface for maximum impact resistance.

Cured High-Gloss Finish

After removing masking, the result is a flawless, pore-free white bathtub that restores original shine with zero tear-out demolition.