Technician using industrial cleaner to strip lime scale and oils from a worn cast iron bathtub in a residential bathroom
Technician using industrial cleaner to strip lime scale and oils from a worn cast iron bathtub in a residential bathroom
Close-up of acid etching agent applied to bathtub surface creating micro-porous texture for maximum polymer adhesion
Close-up of acid etching agent applied to bathtub surface creating micro-porous texture for maximum polymer adhesion
— Step 01 — Surface Prep

Bathtub Cleaning & Surface Prep

Thorough surface decontamination is the foundation of durable reglazing. We remove soap scum, mineral deposits, and old caulking before chemically etching the porcelain or acrylic.

Deep chemical stripping eliminates hard water deposits, body oils, and embedded grime that standard household cleaners leave behind.

Chemical etching creates thousands of microscopic anchor points across the glossy tub surface to guarantee permanent coating bonding.

Hand applying high-grade epoxy structural filler into a chipped porcelain bathtub floor before orbital sanding
Hand applying high-grade epoxy structural filler into a chipped porcelain bathtub floor before orbital sanding
— Step 02 — Restoration

Structural Repair & Masking

Prior to priming, we repair surface cracks, fill rust chips, and feather-sand damaged spots. Full perimeter masking protects your tiles, floor, and fixtures from overspray.

Waterproof synthetic compound fills deep gouges and rust spots, restoring a perfectly smooth contour across the basin floor.

Commercial masking paper and precision tape enclose surrounding walls, vanity units, and plumbing controls to stop paint overspray.

Technician in full protective respirator applying white HVLP spray coating in even passes inside masked bathtub
Technician in full protective respirator applying white HVLP spray coating in even passes inside masked bathtub
Pristine, high-gloss restored white acrylic bathtub after masking removal with smooth pore-free surface reflecting bathroom light
Pristine, high-gloss restored white acrylic bathtub after masking removal with smooth pore-free surface reflecting bathroom light
— Step 03 — Final Finish

Coating Application & Finish

We spray multi-layer HVLP acrylic polymer coating for high durability and deep gloss. Once cured, the tub looks factory-new and is ready for regular daily use.

Advanced HVLP spray equipment delivers thin, even coats of high-density resin that molecularly cross-link as they cure.

The cured finish exhibits high gloss, complete stain resistance, and a smooth, easy-to-clean poreless shell that lasts for years.

Question Short Answer

  • Can you fix damaged spots on my tub or tiles? Yes bathtub restoration technicians have the skills and materials to restore all sorts of damages that may be on your tub.

  • How much does bathtub refinishing cost? Most standard bathtub refinishing projects can cost between $350 and $900 depending on tub type, amount of restoration needed and repairs.

  • Is bathtub refinishing better than replacing a bathtub? Refinishing can save between 75% and 85% of the cost of buying, removing, and installing a new tub.

  • Do bathtub refinishers remove the drain? Most tub reglazers do not remove drains because of plumbing liability, and the risks involved. Professional refinishers use a system that bypasses the need to remove the drain: they safely mask around the drain and create a seal with the refinishing materials. This is standard in the industry. Only some isolated refinishers will consider doing plumbing work. If the job is done correctly, drain removal is not necessary.

  • Can you fix extensive structural damage?

    Yes. Local professionals regularly perform major surface repairs, including filling deep porcelain chips, rust repairs, cracked tiles, large holes in gelcoat tubs, patching cracked acrylic floors, and correcting subfloor sags using materials such as spray foam injection and fiberglass mat restoration.

  • What materials can be reglazed? Leading Alberta service providers work on almost all solid foundations, restoring cast iron, fiberglass, acrylic, steel, and cultured marble, as well as adjacent ceramic tile walls.

  • How long does bathtub refinishing take? Surface preparation and coating application take 3 to 6 hours depending on how large the application is.

  • How long before the bathtub can be used? Wait 24 hours for the coating to fully cure before exposing it to water

  • Does bathtub refinishing have a strong smell? Yes. The chemical coatings produce noticeable fumes during applications and it will dissipate within 24 hours.

  • How long does a refinished bathtub last? A professionally refinished surface lasts 5 to 15 years with proper care.

  • How do I prepare the bathroom beforehand? Homeowners must fix any dripping faucets or leaky plumbing before the technician arrives, as water drops will ruin the curing resin(a very small drip can be handled by the technician). Pre-clean the bathtub before arrival. Remove all personal hygiene products, shower curtains, and loose items to prevent dust settlement.

  • How do I clean a refinished bathtub? Use soft sponges and mild, bleach-free cleaners such as Dawn or Simple Green. Avoid harsh chemicals like heavy alcohols or the cleaner Comet.

You didn’t come this far to stop